A large conveyor chain is a convenient mechanical component that can be compactly transported, but its lifespan is limited.

1. Because large conveyor chains are consumables, they need to be inspected and replaced regularly.

2. Large conveyor chains may experience problems such as chain breakage or breakage due to wear and tear. However, lubrication can be used to extend the wear life.

3. Due to the wear of the sleeve roller, the chain plate collides with the track, causing an increase in chain tension, which may lead to an increase in motor current or chain breakage. Use the correct lubrication method or use bearing rollers to avoid this problem from occurring.

4. Excessive tension may cause fracture problems. If the inertia problem can be fully considered when selecting, the occurrence of such problems can be avoided.

5. Environmental factors such as corrosion may cause fracture. By selecting materials that are suitable for the usage conditions, such problems can be avoided.

6. Poor centering and layout issues may shorten the lifespan or cause fracture problems. As long as the correct settings are adopted, such problems can be avoided.

7. The breakage of large conveyor chains may endanger personal safety or cause significant damage to the equipment. Reliable safety devices should be installed to prevent the breakage of the conveyor chain and prevent the occurrence of danger.

When there are regulations or guidelines for the selection of chains, two choices should be made based on these requirements: the selection and the safety rate selection. Finally, the chain with surplus should be chosen

9. If the holes in the chain plate are enlarged, the diameter of the pins is reduced, or heating is used to facilitate the insertion and removal of the pins, it will significantly reduce the performance of the chain and lead to accidents